Install OPENMANAGED
/opt/dell/srvadmin/bin

PER VEDERE I PARAMETRI DEL BIOS:
[root@srvlabesx01 bin]# ./omreport chassis biossetup
BIOS Setup

General
Boot Sequence : IDE CD-ROM device
Num Lock : On
NIC 1 : Enabled with PXE
NIC 2 : Enabled only
IDE : Auto
User Accessible USB Ports : All Ports On
Processor Virtualization Technology : Disabled
AC Power Recovery Mode : Last
Embedded SATA Controller : Off
SATA Port 0 : Off
SATA Port 1 : Off
Demand-Based Power Management : Disabled
OS Watchdog Timer : Disabled
Processor Execute Disable : Enabled
Processor CMP : 2

Serial Communications
Serial Communications : On without Console Redirection
Console Redirection After Boot : Enabled
External Serial Connector : Com1
Console Redirection Failsafe BAUD Rate : 115200

PER ABILITARE IL VT
[root@srvlabesx01 bin]# omconfig chassis biossetup attribute=cpuvt setting=enabled
BIOS setup configured successfully. Change will take effect after the next reboot.

VERIFICO CHE SIA ABILITATO IL VT
[root@srvlabesx01 bin]# ./omreport chassis biossetup BIOS Setup

General
Boot Sequence : IDE CD-ROM device
Num Lock : On
NIC 1 : Enabled with PXE
NIC 2 : Enabled only
IDE : Auto
User Accessible USB Ports : All Ports On
Processor Virtualization Technology : Enabled
AC Power Recovery Mode : Last
Embedded SATA Controller : Off
SATA Port 0 : Off
SATA Port 1 : Off
Demand-Based Power Management : Disabled
OS Watchdog Timer : Disabled
Processor Execute Disable : Enabled
Processor CMP : 2

Serial Communications
Serial Communications : On without Console Redirection
Console Redirection After Boot : Enabled
External Serial Connector : Com1
Console Redirection Failsafe BAUD Rate : 115200

Il tutto sara’ attivo definitivamente al prossimo reboot

Ho attivato “measure for easy tier”

Rawley Burbridge – – Virtually Speaking

Domani vedremo i risultati

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1030943

After upgrade to 11.04 now vmware workstation 7 crash after start, i need to add:

export LD_PRELOAD=/usr/lib/vmware/lib/libglib-2.0.so.0/libglib-2.0.so.0

in

/usr/bin/vmware

Thank you at http://imapenguin.com

What is the AIX way to disable cron during system maintenance?
lsitab cron to remember the default cron entry.
rmitab cron to disable cron
or is it better to use chitab cron:3456789:once:/usr/sbin/cron

enable cron again: mkitab

svctask recovervdisk vdisk17

Command to view recovery task status:

svcinfo lsrepairsevdiskcopyprogress

More info:

QUA

Connect to CLUSTER SVC:

IBM_2145:xxxx:admin>SVCCONFIG BACKUP
…………..
CMMVC6155I SVCCONFIG processing completed successfully
IBM_2145:xxxx:admin>SVC_SNAP DUMP
Collection system information..
Dumping error log…
Waiting for file copying to complete…
Waiting for file copying to complete…
Creating snap package…
Snap data collected in /dumps/snap.152035...tgz
IBM_2145:xxxx:admin>

Connect to SVC GUI, go to troubleshooting menu, select support, click show full log listing and select with DX mouse the dump snap.152035...tgz and select download.

Question
Is there a way to change the default directories in which the files sent to and from the target machine are saved?

Answer
You can edit the Target registry using Regedit command.
Under the HKEY_LOCAL_MACHINESoftwareIBMTivoliRemoteControlTarget there is a TransferDir key that can be edited at your choice.

1. Open control panel, click on the JAVA icon
2. Click on Network Settings
3. Select the “Direct Connect” option.
4. Select OK, Apply the new settings, and then select OK to exit.

We can verify the status of Automatic mounting of new volumes by looking at the value of the following key:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesMountMgrNoAutoMount

If the value is set to 1: This indicates that Automatic mounting of new volumes is Disabled.

If the value is set to 0: This indicates that Automatic mounting of new volumes is Enabled.