Have you upgraded to at least horizon 7.13?
From March 22nd (this is tomorrow as I am writing to you) versions prior to 7.13 will no longer be in support
Toc Toc … Horizon Upgrade…
SUPPORT
How to mange controller raid with MegaCli over vmware esxi
xseries 2350 M4 + vmware esxi 5.1
Donwload megacli software from ibm site
How to install?
You need have active ssh connection to the esxi server
Install to esxi server :
esxcli software vib install /tmp/vmware-esx-MegaCli-8.04.07.vib –no-sig-check
(The installation probably need put the host in manintenece mode and reboot server)
How to use?
Go to /opt/lsi/MegaCli/ and run ./MegaCli with option :
Check the status all of HD:
./MegaCli -PDList -aALL
or single HD
./MegaCli -PDInfo -PhysDrv [E:S] -aALL (E is the enclosure and is the slot)
Download the log of controller:
./MegaCli -AdpEventLog -GetEvents -f events.log -aALL && cat event.log
Show info configuration:
./MegaCli -AdpAllInfo -aALL
Show controller configuration:
./MegaCli -CfgDsply -aALL
Battery status:
./MegaCli -AdpBbuCmd -aALL
Show rebuild status:
./MegaCli -PDRbld -ShowProg -PhysDrv [E:S] -aALL
And more info:
./MegaCli -h
Find serial number P2000 G3 HP
Use telnet or serial cable to connect
xxx.xxx.xxx.xxx login: admin
Password:
HP StorageWorks MSA Storage P2000 G3 iSCSI
System Name: SANxxx01
System Location: xxxxxxxx
Version: TS240P004-02
# show enclosure-status
Chassis Vendor Product ID CPLD EMP A CH:ID Rev EMP B CH:ID Rev WWPN
Status
—————————————————————————————————————————–
2S6249C294 HP SPS-CHASSIS 22 00:031 2018 01:031 2018 500c0ff015fa2e3c
OK
—————————————————————————————————————————–
Type # Status FRU P/N FRU S/N Add’l Data
——————————————————————————-
FAN 01 OK 592267-002 CN8245T302 —
FAN 02 OK 592267-002 CN8245T303 —
PSU 01 OK 592267-002 CN8245T302 —
PSU 02 OK 592267-002 CN8245T303 —
Temp 01 OK BK829B CN8243M044 temp=41 C
Show configuration and status HP raid esxi 5.1
Use iso esxi 5.1 customized HP
~ # /opt/hp/hpacucli/bin/hpacucli
HP Array Configuration Utility CLI 9.40.12.0
Detecting Controllers…Done.
Type “help” for a list of supported commands.
Type “exit” to close the console.
=> ctrl all show config
Smart Array E200i in Slot 0 (Embedded) (sn: QT7AMV7298 )
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (558.7 GB, RAID 5, OK)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK)